Environmental laboratory
Environmental laboratory testing services
Field sampling and standard-method analysis of water, soil, waste, air, noise and workplace exposure for oil, gas, energy and industrial projects across Iraq.
Licensed environmental laboratory by the Iraqi Ministry of Environment (MOEN), Licence No. 987, and registered with the Iraqi Chemists Syndicate (ICS).
What we test
Five testing areas, one integrated laboratory. Every test follows the same controlled workflow: field sampling, preservation and transport, analysis, QA/QC review and reporting.
Reliable data behind every environmental decision
Atyaf Al-Kimiya | Spectra Chem™ operates a MOEN-licensed environmental laboratory in Iraq. Our field and laboratory teams work together from sampling plan to final report, delivering data for EIA/ESIA studies, baseline surveys, compliance monitoring and site investigations across Iraq.
Who we serve
- Oil & gas operators
- Refineries & petrochemicals
- Power plants
- Cement & steel
- Infrastructure projects
- Environmental consultants
Licences & accreditation
MOEN Licence No. 987
Environmental Laboratory
Issued 22 Apr 2026, valid to 22 Apr 2029
Verification code 646806818737575
Iraqi Chemists Syndicate
Certified chemical analysis laboratory (industrial & scientific), registered with the Iraqi Chemists Syndicate (ICS).
Quality assurance & control
- Validated methods: SM, US EPA, ISO, ASTM, NIOSH
- Calibrated instruments, traceable standards
- Certified reference materials (CRMs)
- Blanks, duplicates and matrix spikes per batch
- Proficiency testing program (PTP) and external QA
- Chain of custody and sample preservation
Analytical techniques
Chromatography
GC-MS, GC-FID, GC-ECD, GC-NPD, HRGC-HRMS, ion chromatography
Spectrometry
ICP-OES, ICP-MS, AAS (flame, graphite furnace and hydride), UV-Vis
Radiometry
Liquid scintillation counting (LSC), HPGe gamma spectrometry
Results are reported against Iraqi limits of the Ministry of Environment (MOEN), Ministry of Health (MOH), Ministry of Water Resources (MOWR), Ministry of Oil (MOO) and the Central Organization for Standardization and Quality Control (COSQC), and against international guidelines (WHO, IFC EHS, US EPA) or project-specific lender standards.
Test packages by application
The key tests for each purpose. These are typical parameter sets we recommend; every package is adjusted to the applicable permit, regulation or client specification.
Drinking & bottled water
Colour, turbidity, pH, TDS, hardness, major ions, nitrate, nitrite, fluoride, As, Pb, Cd, Hg, Cr, THMs, coliforms, E. coli
IQS 417, WHO guidelinesProduced water & brine
TDS, salinity, density, chloride, Ba, Sr, Fe, oil-in-water, BTEX, PAHs, NORM, corrosion bacteria (SRB, APB)
Re-injection and disposal permitsIndustrial effluent & self-monitoring
pH, BOD₅, COD, TSS, oil & grease, phenols, sulfide, cyanide, ammonia, heavy metals, toxicity
Law No. 25, IFC EHSSanitary wastewater & WWTP
BOD₅, COD, TSS, nitrogen, phosphorus, MLSS, MLVSS, SVI, coliforms, helminth eggs, jar test
Treatment performance and reuseRO, boiler & cooling water
SDI, LSI, Ryznar and Puckorius indices, silica, hardness, alkalinity, iron, conductivity, hydrazine, MIC bacteria
Scaling and corrosion controlSwimming pools & bathing water
Free and combined chlorine, cyanuric acid, pH, turbidity, E. coli, Pseudomonas aeruginosa, Legionella, Staphylococcus aureus
Public health complianceIrrigation & agriculture
EC, TDS, SAR, sodium %, boron, chloride, bicarbonate, nitrate, pH; soil available nutrients
FAO Irrigation & Drainage Paper 29Aquaculture & livestock water
Dissolved oxygen, ammonia, nitrite, H₂S, alkalinity, hardness, pH, metals, coliforms
Stock health and productivityContaminated land & drilling waste
TPH bands, BTEX, PAHs, metals, Cr(VI), PCBs, chloride and salinity, TCLP leachate
Site investigation and closureHazardous waste & export
TCLP (42 analytes), PCBs, total halogens, metals, hazardous characteristics for classification
US EPA 1311, BS EN 12457, Basel ConventionStack & ambient compliance
Stack O₂, CO, NOx, SO₂, dust, HCl, HF, PCDD/F; ambient PM10, PM2.5, NO₂, SO₂, O₃, H₂S
Iraqi emission limits, IFC EHSWater and effluent testing follows Iraqi Water Law No. 25 – System of Rivers and Other Water Resources Protection (discharges to rivers and receiving-water quality). Drinking water is assessed against Iraqi Standard No. 417 – Standard Specification for Drinking Water (physical, chemical and microbiological limits).
Not sure which package applies? Send us the permit, regulation or project scope and we will propose the parameter list.
Water, wastewater & brine analysis
Matrices: drinking water, groundwater, rivers & lakes, seawater, pool water, RO & process water, produced water & brine, wastewater & effluents
Physical & general
Temperature, colour, pH, EC, resistivity, turbidity, TDS, TSS, TS, fixed and volatile solids, settleable solids, density, viscosity, salinity, ORP, DO
SM 2000 series, ISO 10523, ISO 7027Organic load & sum parameters
BOD₅, COD, TOC, DOC, AOX, TOX, permanganate index, fat, oil & grease, phenols, MBAS and non-ionic surfactants
SM 5210, SM 5220, SM 5310, ISO 9562Anions & nutrients
Cl, SO₄, F, Br, I, NO₃, NO₂, PO₄, chlorite, bromate, HCO₃/CO₃, ammonium-N, TKN, total N, total P
Ion chromatography, SM 4110 B, ISO 10304-1Inorganic non-metals
Free and WAD cyanide, sulfide, sulfite, free sulfur, free chlorine, chloramines, hydrazine, silica, free CO₂, cyanuric acid
SM 4500 series, ASTM D1385Metals & elements
75 elements incl. heavy metals, rare earths and precious metals; Cr(VI), Fe²⁺/Fe³⁺, Hg
ICP-OES, ICP-MS, AAS, EPA 200.7, SM 3120/3125Volatile organics
Priority VOCs, BTEX, MTBE, trihalomethanes, 9 haloacetic acids, volatile fatty acids
GC-MS, GC-FID, headspaceSemi-volatile organics
21 PAHs, alkylated NPD, SVOCs, dioxins & furans, 7 phthalates, 30 phenols, chlorinated hydrocarbons, nonylphenols and bisphenol A
EPA 8270 E, EPA 3510 CPesticides, herbicides & PCBs
52 organophosphorus and 36 organochlorine pesticides, phenoxy herbicides, PCB congeners and Aroclors
EPA 8141 B, GC-ECD / GC-NPDPetroleum hydrocarbons
Aliphatic and aromatic TPH bands (C6–C35), nC10–nC40, hydrocarbon oil index, mineral oils
EPA 8015 B, GC-FIDMicrobiology & biology
22 tests incl. coliforms, E. coli, enterococci, Legionella, Pseudomonas, Salmonella, Vibrio, helminths; plankton and benthic species
SM 9000 series, ISO 9308-1, ISO 11731Jar test, scaling & process control
Jar test for water and wastewater treatability (coagulant and flocculant dosing); LSI, Ryznar and Puckorius indices, SDI (5/10/15 min), MLSS/MLVSS, SVI
ASTM D4189, ASTM D2035Water sampling
Lakes, rivers, sea, wastewater and groundwater sampling; microbiological sampling
ISO 5667 series, ISO 19458Compared with Iraqi drinking-water, effluent-discharge and river-protection limits, WHO guidelines and IFC EHS effluent guidelines.
Soil, sediment, sludge & waste
Contamination screening, site investigation and waste classification for oilfield, industrial and brownfield sites.
Matrices: soil & contaminated land, bottom sediment, sewage & treatment sludge, drilling cuttings & mud, oily sludge & tank bottoms, waste & flare pits, waste oil, biota
Sample preparation & digestion
Drying, crushing, splitting, pulverising; aqua regia, microwave, HF multi-acid, lithium borate and peroxide fusion, saturated paste
Physical & general
Moisture, dry matter, bulk and particle density, texture, structure, pH, EC, total salts, loss on ignition (550 °C), ash
Organic carbon & sum aggregate parameters
TOC, DOC, organic matter, TOX, oil and grease, hydrocarbons, phenol index, linear alkyl sulfonates
Inorganic parameters
Cr(III) and Cr(VI), cyanide, thiocyanate, anions, total nitrogen, phosphorus, silica
Metals & elements
75 elements by ICP-OES / ICP-MS and AAS after acid or microwave digestion
Organic contaminants
TPH bands, BTEX, VOCs, SVOCs, PAHs, NPD, PCBs, dioxins & furans, OC/OP pesticides, herbicides, phenols, chlorinated hydrocarbons
TCLP leaching
42 regulated analytes: 8 metals, VOCs, SVOCs, pesticides, herbicides and TPH-TCLP
US EPA 1311Waste oil & biota
PCBs, polychlorinated terphenyls, phthalate esters, total halogen and chloride in waste oil; organics and metals in biota
Agricultural soil & fertility
Available phosphorus and potassium, DTPA-extractable Fe, Mn, Zn and Cu, calcium carbonate equivalent, organic carbon, soluble cations and anions, SAR
Typical applications
- Drilling wasteCuttings and mud classification before disposal or treatment
- Pits & spillsWaste-pit closure and spill impact assessment
- RemediationBaseline, progress and close-out verification
Radioactivity / NORM and dioxin testing of soil, sludge, ash and waste: see Specialist analyses.
Ambient air & stack emissions
Ambient air: gases
NO₂, SO₂, O₃, CO, H₂S, NH₃, HF, HCl, mercaptans
Ambient air: particulates
PM10, PM2.5, TSP and deposited dust; 19 metals in PM10 and deposited dust
Ambient air: organics
150+ VOC vapours, BTEX, PCDD/PCDF
EPA TO-9A (dioxins)Stack: combustion gases
O₂, CO, CO₂, NO/NO₂/NOx, SO₂, SO₃, H₂S, total gaseous organic carbon, moisture, velocity and flow
EN 15058, EN 14792, EN 14791, EN 12619, EN 14789Stack: acid gases & dust
HCl, HF, HBr, Cl₂, HCN, NH₃, H₂SO₄ mist, total fluoride; particulate matter 5–1000 mg/m³, smoke density
EN 1911, EN 13284-1, ISO 9096, EPA 5 / 26AStack: trace organics & odour
Gas- and particle-phase PAHs, PCBs, PCDD/F and dl-PCBs, formaldehyde, odour concentration
EN 1948-1 to 4, ISO 11338, EN 13725CEMS quality assurance
QAL2 and annual surveillance tests for CO, NOx, SOx, O₂, HCl, HF, TOC, dust and flow
EN 14181Mobile sources
CO, CO₂ and hydrocarbon sampling from vehicles and mobile equipment
How we measure
- Direct-reading analysersNDIR, paramagnetic, chemiluminescence
- Isokinetic samplingParticulates, metals, PCDD/F
- Sorbent & passiveTubes and diffusion samplers
- Dispersion modellingConcentration contours at receptors
Noise
Measurement
Environmental sound pressure levels (LAeq, LAmax, LAmin, L10, L90), sound power of machinery and multisource industrial plant
ISO 1996-1/2, ISO 3744 / 3746, ISO 8297Modelling & mapping
Outdoor propagation modelling, noise contour maps and receptor assessment
ISO 9613-2Occupational hygiene & workplace exposure
Personal and area sampling to assess worker exposure against occupational exposure limits, using recognised NIOSH, OSHA and ISO methods.
Workplace dusts
Total and respirable dust, crystalline silica, carbon black, alkaline dusts, rubber process dust and fume
NIOSH 0600 series, NIOSH 7601Asbestos
Asbestos identification in bulk and solid materials by polarised light microscopy
NIOSH 9002Metals in workplace air
40 elements incl. Pb, Cd, Cr, Mn, Ni, As, Be, Co and Zn; hexavalent chromium
Filter sampling, ICP-AES, NIOSH 7300 / 7600Acids & inorganic gases
HF, HCl, HBr, HNO₃, H₂SO₄, H₃PO₄, particulate fluoride, HCN, CO, NOx, O₂
Ion chromatography, NIOSH 7903 / 6604, OSHA ID-196Organic vapours
VOCs, formaldehyde and PAHs by sorbent-tube sampling
GC-FID, GC-MS, NIOSH 3500Bioaerosols & indoor air
Airborne bacteria and fungi in offices, camps, control rooms and clinics
NIOSH 0800Thermal comfort
PMV and PPD indices for moderate thermal environments
ISO 7730Workstation noise
Emission sound pressure levels at work stations and specified positions
ISO 11201, ISO 11204Specialist testing for complex matrices
Dedicated workflows for persistent organic pollutants, naturally occurring radioactivity, oilfield corrosion, asbestos and PFAS, together with benthic ecological studies.
Dioxins & furans (PCDD/PCDF)
- Compounds
- 17 toxic 2,3,7,8-substituted PCDD/PCDF congeners, dioxin-like PCBs and PCB congeners
- Workflow
- Isokinetic, ambient or matrix sampling, then isotope-dilution extraction and clean-up, HRGC-HRMS analysis and a WHO-TEQ / I-TEQ report
- Matrices
- Stack gas, ambient air, water, soil, sediment, sludge, waste oil and biota
- Methods
- EPA 1613 B (water, solids), EN 1948-1 to 4 (stack), EPA TO-9A (ambient air)
Benthic studies
- Scope
- Benthic macroinvertebrates and bottom-dwelling organisms in rivers, lakes, marshes and coastal sediments
- Parameters
- Taxonomic composition, abundance and density, biomass, diversity indices (Shannon–Wiener, Simpson), biotic indices and EPT taxa
- Methods
- Grab, corer and kick-net sampling; sieving, sorting and microscopic identification (ISO 10870, ISO 16665)
- Use
- EIA/ESIA baselines and monitoring of discharges, dredging and river crossings
Radioactivity & NORM
- Parameters
- Gross alpha, gross beta; K-40, Ra-226, Th-232, I-131, Rn-222; total uranium
- Methods
- Liquid scintillation counting (ISO 11704); HPGe gamma spectrometry (ISO 10703)
- Matrices
- Drinking and produced water, brine, soil, sludge, scale, sediment, waste
- Use
- Waste classification and worker exposure screening
Microbiologically influenced corrosion (MIC) bacteria
- Bacteria
- SRB, APB, IRB, IOB, GHB, NRB
- Method
- Serial-dilution culture, NACE TM0194
- Matrices
- Produced, injection and process water; seawater and brine
- Use
- Corrosion risk and biocide performance monitoring
Asbestos
- Scope
- Identification of asbestos types in bulk building materials, insulation, soil and waste
- Method
- Polarised light microscopy (NIOSH 9002)
- Use
- Demolition surveys, waste classification and worker protection
PFAS
- Parameters
- PFOS, PFOA, PFHxS and extended PFAS lists
- Methods
- LC-MS/MS per US EPA 537.1, 533 and 1633
- Matrices
- Drinking, ground and waste water; soil and sediment; firefighting foam
From sample request to regulator-ready report
- FieldRequest & scopeParameters, limits and site details
- FieldSampling planLocations, frequency and containers
- FieldField samplingTrained teams and field measurements
- FieldPreserve & shipCold chain and chain of custody
- LaboratoryLab receiptSample check, coding and registration
- LaboratoryAnalysisValidated methods, calibrated instruments
- Quality gateQA/QC reviewBlanks, duplicates, spikes and CRMs. If QC criteria are not met, the samples are re-analysed before anything is reported.
- ReportingReportResults vs Iraqi and international limits
- CoverageField sampling and shipping throughout Iraq
- TurnaroundStandard: X working days. Urgent service available.
- IntegratedLab data feeds directly into our EIA, ESIA and monitoring studies
Send us your parameter list or project scope
We will propose the test schedule, sampling plan and applicable limits for your site.
What to send us
- Parameters or standardYour parameter list or the regulation / permit limits to comply with
- Sample matrix & quantityWater, soil, waste, air, noise or workplace, and number of samples
- Site & scheduleLocation, access requirements and sampling dates
- Turnaround & formatRequired delivery time and reporting format
- info@spectchem.com
- Offices
- Baghdad / Erbil, Iraq
